Economics is very important in almost all the area. When contamination level is high, it is better to use pre-filter. Bag filter is proven economical pre-filter. Many times it can be used as a final filter too. The advantage of bag filters are -
Bags are made from polypropylene or polyester. Normally woven material is used for making bags. For finer filtration non-woven media is preferable. It is properly stitched at the joints and the top rubber color. Color is used to hold the bag in the housing as shown here in the picture. A dispenser is inserted in to the bag housing to hold the bag and avoid by-pass. The bag is rested on perforated cylinder.
The filtration is in to out in bag filter. Fluid enters from the top of the housing in to the bag. Contamination retains on the bag and clear fluid passes from bag through perforated cylinder. Once bag is full of contamination, one needs to clean it by taking it out from the housing or replace it with new one.
Standard size of the bags are 7" x 33" and 7" x 14". However it can be made of any size as per the requirement. In case of high flow rate, multi bag housing can be provided to take care of the flow. Standard bags are available from 5 to 100 micron cut-off range.
Home :: About Us :: Products :: Inquiry Basic Filteration :: Efficiency of Filteration :: Hydraulic Filter :: Special Filter Products Range - Polypropylene Spun-Bonded Cartridge ::Wound Filter Cartridge :: Resin Bonded Cellulose Cartridge Pleated Polypropylene Cartridge :: Polysulphone Cartridge :: PTFE Cartridge :: Ceramic Cartridge :: Filter Papers/Pads :: Sintered S.S. Cartridge :: Sintered Bronzed Cartridge :: Filter Housing :: Bag Filter :: Strainers/Basket Filter Developed By #1Vinayak InfoSoft