|
Based
on fluid parameters, Techno-Filt
design and select the filter cartridge
from our wide range and manufacture
required filter housing in C.S.,
M.S., M.S.R.L., S.S. 316, S.S.
304 and give total solution to
the end users or traders. We have
been able to offer filters for
most demanding applications from
single source.
Economics
is very important in micron filtration
and we, being a wide experience
team of engineers, recommend long-term
economical solution to the problem.
|
|
|
|
| POLYPROPYLENE
CARTRIDGE |
 |
100%
Polypropylene Cartridge made from very
fine fibers. Polypropylene media gives
wide chemical compatibility. Available
in 10", 20", 30" and
40" length with pore size ranging
from 0.5 to 100 m.
.....More
|
|
|
WOUND
FILTER CARTRIDGE
|
|
Nominal
rated Wound cartridges are widely used
as a pre-filter for economical filtration.
It is available in different media and
core for wider chemical compatibility.
...More
|
|
|
|
| RESIN
BONDED CELLULOSE CARTRIDGE |
 |
RBC-II
cartridge is resin bonded, cellulose
depth type, graded pore structure. Grooved
and un-grooved options available for
more surface area.
...More
|
|
|
PLEATED
POLYPROPYLENE CARTRIDGE
|
|
High
dirt capacity pleated depth filter cartridges.
Absolute rated filter with wide range
of 0.5 m
to 70 m,
lengths 5", 10" 20",
30" & 40" with a variety
of end fittings to suit existing housings.
...More
|
|
|
| POLYSULPHONE
CARTRIDGE |
 |
Polyethersulfone
(PES) membrane with polypropylene support
layer and polypropylene hardware cartridge.
100% integrity tested cartridge before
shipment.
...More
|
|
|
PTFE
CARTRIDGE
|
|
PTFE
membrane with all -Fluoropolymer construction
for high temperature applications.
Extremely
low extractables & excellent chemical
compatibility. Integrity testabe cartridge
- thermally bonded.
...More
|
|
|
| CERAMIC
CARTRIDGE |
 |
For
more technically demanding dust filtration
applications, ceramics are highly efficient,
achieving better results than often
demanded by legal requirements.
...More
|
|
|
SINTERED
S.S. CARTRIDGE
|
|
Sintered
S.S. cartridges are produced by cold
isostatic pressing, which gives the
high prosity material its shape stability
an properties of a metallically strong
component.
...More
|
|
|
| FILTER
HOUSING |
 |
Filter
housing is only the hardware to house
the cartridge. It is not that simple.
Design of filter housing needs lot of
skill to consider many parameters.
...More
|
|
|
BAG
FILTER
|
|
Economics
is very important in almost all the
area. When contamination level is high,
it is better to use pre-filter. Bag
filter is proven economical pre-filter.
Many times it can be used as a final
filter too.
Bags
are made from polypropylene or polyester.
...More
|
|
|
|
|
|
|
|
|
|
|
